Filter
Top Products
26
CR
The selected input channel is in the
resistance (CR) mode.
Rmt
Indicates that the electronic load is in remote
state (RS-232). In the remote state, only the
active key is the Local key.
Tran
The selected input channel is enabled
for transient operation.
Shift
Indicates that the shift key has been pressed.
List
A list is initiated or running.
Lock
keyboard is the mode for password
Function keys
Main Function:
Set up a constant current input.
Set up a constant power input.
Set up a constant resistance input
Select CC, CR and CV and CW modes.
Select Current, Resistance and Voltage levels.
Set Trigger and Transient levels.
Set up front panel measurements.
Recall the stored data
Battery testing
Short-circuit testing
Entry Keys
Entry keys let you:
Enter programming values.
Increasing or decreasing setup values.
Press
△
or
▽
select the front panel menu parameters.
Power
The Power switch turns the electronic load power on or off.
Example
I-set (set up a constant current from 0 to Max current )
Set up a constant DC current input is the first main function of programmable DC electronic load,
8500 serial electronic load provides two methods to set up the constant DC current input by using the number
keyboard and the rotary button. Please see the following operation procedure.
Procedure Operation details VFD display
STEP 1
Press
I-setI-set
CURRENT=0.000A
STEP 2
Enter the password or jump the step 4 if
your password for reentering
PASSWORD: