Filter
Top Products
7
The Rear Panel
4
1
23
1
3 Pin IEC320 ac input connector. (Power code requires ground conductor).
2
4 Pin Trigger and Remote sensing connectors.
3
9-Pin COM port interface connector.
4
Power switch (110V / 220V)
Front Panel Display
OFF
power off
Trigger
Indicates that the electronic load is waiting an
initiate and trigger to occur.
CC
Constant current (CC) mode.
Sense
Indicates that the electronic load is in Remote
sensing state
CV
Constant voltage (CV) mode.
Error
A errors have occurred
CW
Constant power (CW) mode.
Link
In the communication state
CR
Resistance (CR) mode.
Rmt
Indicates that the electronic load is in remote
state (RS-232). In the remote state, only the
active key is the Local key.
Tran
The input channel is enabled for
transient operation.
Shift
Indicates that the shift key has been pressed.
List
List mode is initiated or running.
Lock
keyboard is locked by password
Unreg
The input is unregulated.