Filter
Top Products
8 Loading Printing Paper
Loading Printing Paper
This section describes the available page size and media type, and how to load
paper.
Loading paper
1 Turn on the printer.
See “Turning On the Printer” on page 6.
(1)
Press the Open button, then open the Paper Feed Tray and
Paper Output Tray, and fold the Paper Feed Tray in half.
(2) Press the ON/OFF button.
2 Flatten the four corners of the paper before loading it.
3 Ensure that the Paper Thickness Lever is set to the right.
4 Load the paper.
Do not load higher than the Paper Guide’s thickness.
Note
Pull up the LCD Monitor and adjust its angle in the position where you
can see it clearly.
Note
If paper is curled, gently bend the corners in the opposite direction until the paper
becomes flat. See “Paper is curled.” on page 42.
Important
Always load paper in portrait orientation.
Note
When printing, set the Paper
Thickness Lever to the right.
Set the Paper Thickness Lever
to the left only if ink smudges or
the printed surface is stained.
Return the Paper Thickness
Lever to the right after printing.
(3) Slide the Paper Guide against the
left side of the paper stack.
(1) Load the paper into the Rear Tray
with the print side facing up.
If you use Canon genuine 4" x 6" /
101.6 x 152.4 mm paper, up to 20
sheets of paper can be loaded.
(2) Align the paper stack with the
right edge of the Rear Tray.
z Photo stickers
z 4" x 6" or Card
Shorter margin