Filter
Top Products
34 Changing the Printer Settings
Other settings
Date display
Changes the display format of shooting dates when printed.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Slide show setting
Selects Image quality: Standard or Image quality: High for the image display
quality of the slide show.
Language selection
Changes the language for LCD messages and menus.
Reset setting
You can change the settings back to the default, except for the LCD language and
the position of the Print Head.
Note
z When Date ON is selected on the advanced print settings screen, the shooting
date is printed in the date display format you selected. For print setting, see
“Advanced Print Settings Screen” on page 15.
z The shooting date format is as specified in the DPOF setting from DPOF
printing.
Important
z Remove the memory card before changing this setting. For details, refer to the
User’s Guide on-screen manual.
z When you write the data on the memory card, connect the printer with the AC
adapter. The printer cannot be set to the Read/write mode with using the
optional battery. The printer can be set to the Read/write mode when using
both the AC adapter and optional battery, but do not remove the AC adapter
when you write the data on the memory card.
z If you set this setting to Read/write mode, card direct printing cannot be done.
After you finish operation of the memory card dedicated drive, be sure to set it
back to Read-only mode. And also, when you turn off the printer, the Read/
write mode will be canceled and the setting is returned to the Read-only
mode when you turn on the printer next time.
Note
When Image quality: High is selected, it may take time until images are
displayed.