Filter
Top Products
113
Shooting – Selecting Particular Effects
3
Press the T arrow on the omni
selector, then select the number
of shots using the W or X arrow
on the omni selector.
zIf you press the W or X arrow on the
omni selector continuously, the number
of shots increases in units of 5 shots
at a time.
zThe maximum number of shots* is determined according to the
CF card’s remaining capacity.
* In some cases, the actual maximum number of shots may be fewer than
the displayed number.
4
Press the SET button
z appears on the LCD monitor and appears on the display
panel.
5
Press the shutter button.
zThe first image is shot and the interval shooting session starts.
zOnce the set number of shots is taken, the camera automatically
powers down regardless of the power saving function settings.
zIf the below operations are accessed while the interval shooting is
in process, the interval shooting session will be canceled.
• Turning the mode dial or pressing the shutter button halfway
while the camera is waiting to shoot the next image
• Opening the CF card slot cover or battery cover
• Switching to Playback mode
• Turning off the power
zOnce the interval shooting session is started, all operation
buttons become inactive.
zThe lens stays extended until the next image is shot.
zImages are not displayed on the LCD monitor right after
being shot.
zInterval shooting is not available when the date and time are
not set.
zContinuous Shooting, AEB mode and Focus-BKT mode are
not available. The self-timer can only be used for the first shot in
the series.
EC140CUG_Eng.book Page 113 Thursday, July 29, 2004 3:16 PM