Filter
Top Products
71
Shooting – Letting the Camera Select Settings
3
Shoot the first image.
zThe exposure and white balance settings are set and locked with
the first image.
4
Compose and shoot the second image so that it
overlaps the first.
zMinor discrepancies in the overlap can be corrected with the
software.
zAn image can be retaken. Press the S, T, W or X arrow on the
omni selector to return to that frame.
5
Use the same procedures to shoot the remaining
frames.
zA maximum of 26 images can be recorded either horizontally or
vertically.
6
Press the SET button after the last shot.
zSee page 206 for settings that can be changed in this mode.
zA custom white balance setting (p. 96) cannot be set in
mode. To use a custom white balance setting, first set it in
another shooting mode.
zThe settings in place for the first image are locked in and cannot
be changed for subsequent shots.
zA TV cannot be used as the monitor for shooting in this mode.
Sequence Sequence
EC140CUG_Eng.book Page 71 Thursday, July 29, 2004 3:16 PM