Filter
Top Products
Using an Externally Mounted Flash (Sold Separately) (continued)
182
How to Mount Macro Ring Lite MR-14EX and Macro
Twin Lite MT-24EX
The separately sold Conversion Lens Adapter LA-DC58D is required
to mount Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX on
the camera.
zThe externally mounted flash will not fire in , or
continuous shooting.
zThe Bracket mode cannot be used for flash photography. If the
flash fires, only one image gets recorded.
zFlashes (especially high-voltage flashes) or flash accessories
made by other manufacturers may override certain camera
functions or cause a camera malfunction.
zThe following functions can be used with a Speedlite 220EX,
420EX, 550EX or 580EX.
•Auto Exposure (Use the E-TTL mode with a 550EX or 580EX)
•FE Lock (Not available in M mode)
•Flash Sync (1st-curtain/2nd-curtain) (2nd-curtain priority with
Speedlite 550EX or 580EX)
•Daylight Synchro
•Slow Synchro
•Flash Exposure Compensation (When Speedlite 550EX or
580EX is used, if flash exposure adjustments are made both
from the camera and the flash, the 550EX’s (or 580EX’s) flash
exposure compensation setting takes precedence when the
flash is set to E-TTL mode. The camera’s flash exposure
compensation setting will not activate.)
•Auto Zoom (Not available with the 220EX)
1
Turn off the camera. Then press
and hold the ring release button
and remove the outer ring on the
lens.
Ring Release Button
Ring
EC140CUG_Eng.book Page 182 Thursday, July 29, 2004 3:16 PM