Filter
Top Products
Automated Playback (Slide Show) (continued)
136
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1 – 3. Up to 998
images may be marked per slide show. Images display in the order
of their selection.
4
When the slide show is over, press the MENU button.
zThe slide show menu appears again. Press the MENU button
again to close the menu.
zMovie images play for the length of time that they were recorded
regardless of the time set in the slide show settings.
zThe power saving function is disabled while a slide show plays
on the camera (p. 31).
1
Display the slide show menu
(p. 135).
2
Press the S arrow on the omni
selector to select [Program].
Press the W or X arrow to select
[Show 1], [Show 2] or [Show 3].
zA check mark will appear beside a show
already containing images.
3
Press the T, and W or X arrow on the omni selector
to choose [Select] and press the SET button.
4
Mark images to include in the
show.
Single Image Playback
zMove between images using the main
dial or the W or X arrow on the omni
selector and mark or remove marks from
images using the S or T arrow on the
omni selector.
zThe selection number and a check mark
appear at the top of selected images.
EC140CUG_Eng.book Page 136 Thursday, July 29, 2004 3:16 PM