Filter
Top Products
137
Playback, Erasing
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have
the show repeat itself continuously.
Index Playback
zPress the button to switch to index
playback (3 images).
zSelect an image using the main dial or
the W or X arrow on the omni selector
and mark or remove marks from images
using the S or T arrow on the omni
selector.
zThe selection number and a check mark
appears at the bottom of selected
images.
zAfter you press the SET button, you can
select all the images by selecting [Mark
all] using S or T on the omni selector
and pressing the SET button again. (You
can deselect all the images by selecting
[Clear all].)
zYou can select images using the main
dial or the W or X arrow on the omni
selector and change the settings using
the S or T arrow on the omni selector
after [Mark all] or [Clear all] has been
selected.
5
Press the MENU button.
zThe image selection screen will close.
Play Time
Sets the duration that each image in a slide show is displayed.
The options are any one of 3 – 10 seconds, 15 seconds,
30 seconds and Manual.
Repeat
Sets whether the slide show stops when all the slides have
been displayed or continues to display until stopped.
1
Display the slide show menu.
EC140CUG_Eng.book Page 137 Thursday, July 29, 2004 3:16 PM