Filter
Top Products
Shooting Panoramic Images (Stitch Assist) (continued)
70
Shooting
Images can be shot in the following 5 sequences in Stitch Assist mode.
zCompose each frame so that it overlaps 30 to 50% of the
adjoining image.
Try to keep the vertical misalignment to within 10% of the image
height.
zDo not include moving items in the overlap.
zDo not try to stitch images that include both distant and close
subjects. Objects may appear warped or doubled up.
zMake the brightness in each image consistent. The final image
will appear unnatural if the difference in brightness is too great.
zFor good results, pan (swivel) the camera to take successive
shots.
zTo shoot close-ups, slide the camera over the subject, keeping it
parallel as you move.
Horizontally, left to right
Horizontally, right to left
Vertically, bottom to top
Vertically, top to bottom
Clockwise starting at the top left
1
Turn the mode dial to .
zThe LCD monitor will turn on.
2
Select the shooting sequence
using the W or X arrow on the
omni selector and press the SET
button.
zThe shooting sequence is set.
zYou can also press the shutter button
directly to shoot without pressing the SET
button.
EC140CUG_Eng.book Page 70 Thursday, July 29, 2004 3:16 PM