Filter
Top Products
Adjusting the Tone (White Balance) (continued)
96
Setting a Custom White Balance
Shoot after reading the white balance data in (Custom1) or
(Custom2) in the following cases since the white balance may not be
correctly adjusted in (Auto):
•Shooting close-ups
•Shooting subjects of monotone color (such as sky, sea or forest)
•Shooting with a peculiar source of light (such as a mercury-vapor
lamp)
2
Select the desired setting using
the main dial or the W or X arrow
on the omni selector.
zPlease see below regarding the
custom setting.
zYou can shoot the image right after
selecting settings by pressing the shutter
button. The menu displays again after the
shot, allowing you to change the settings
easily.
3
Press or click the main dial.
zThe white balance cannot be adjusted when the photo effect is
set to (Sepia) or (B/W).
1
Press WB (T on the omni selector).
zThe current white balance mode will appear on the display panel
and the white balance setting menu will appear on the LCD
monitor if it is on.
2
Select (Custom1) or
(Custom2) using the main dial or
the W or X arrow on the omni
selector.
EC140CUG_Eng.book Page 96 Thursday, July 29, 2004 3:16 PM