Filter
Top Products
187
Appendix
Mounting the Lenses
zYou are recommended to use Macro Ring Lite MR-14EX or
Macro Twin Lite MT-24EX for flash photography with the
close-up lens mounted on the camera. (If you plan to attach
Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX, first
attach Macro Lite Adapter 58C (sold separately) to Close-up
Lens 250D.)
zWhen using the built-in flash to shoot, a portion of the image in
the viewfinder may appear to be blocked by the wide converter
or tele-converter and appear dark.
zWhen using the viewfinder to shoot, a portion of the image in the
viewfinder may appear to be blocked by the wide converter or
tele-converter.
1
Turn the power off and press the
ring release button and remove
the ring from around the lens on
the camera body.
2
Attach the conversion lens
adapter to the camera by aligning
the part of the adapter marked (A)
with the ring release button, then
rotating it until the mark.
zTo remove the conversion lens adapter,
hold down the ring release button and
turn the adapter in the opposite direction
shown.
Ring Release Button
Ring
EC140CUG_Eng.book Page 187 Thursday, July 29, 2004 3:16 PM