Filter
Top Products
178
Attaching the Lens Hood LH-DC30
(Sold Separately)
When shooting backlit scenes without a flash with the lens set to a
wide angle, you should attach the lens hood to prevent light outside
the scene from coming into the lens.
zWhen using the lens hood, you
cannot attach any other optical
accessories (sold separately) to the
camera.
zThe LH-DC30 consists of an adapter
component and a hood component. At
the time of purchase, the adapter and
the hood are joined together. Turn in
the direction of the arrow to separate
the two components.
1
Turn off the camera. Then press
and hold the ring release button
and remove the outer ring on the
lens.
2
Attach the adapter to the camera
by aligning the part of the adapter
marked (A) with the ring release
button, then rotating the lens
adapter until the part marked (A)
aligns with the mark.
Turn to release
Adapter
Hood
Ring
Ring Release Button
EC140CUG_Eng.book Page 178 Thursday, July 29, 2004 3:16 PM