Filter
Top Products
145
Print Order, Transferring
3
Select images for printing.
Single Images
zWhen the print type (p. 146) is set to
[Standard] or [Both], select an image
using the main dial or the W or X arrow
on the omni selector. You can set the
number of copies (up to 99) to be printed
using the S or T arrow on the omni
selector.
zWhen the print type (p. 146) is set to
[Index], select an image using the main
dial or the W or X arrow on the omni
selector and mark or remove marks from
images using the S or T arrow on the
omni selector. A check mark appears on
the marked image.
zYou can use the same procedures to
select images in index playback (3 images). Press the button
to switch between single image playback and index playback.
All the Images on a CF Card
zPress the button to switch to index
playback (3 images).
zYou can set one copy of each image to
print by pressing the SET button, then
selecting [Mark all] using the S or T
arrow on the omni selector, and pressing
the SET button again.
zWhen the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print
settings can be deleted. For the
instructions on changing settings, please
reread Step 3 from the beginning.
zYou can cancel all the settings by
selecting [Clear all].
4
Press the MENU button.
zThe selection mode will turn off and the Print Order menu will
reappear.
Number of
Copies
EC140CUG_Eng.book Page 145 Thursday, July 29, 2004 3:16 PM