Filter
Top Products
3
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Safety Precautions
• Before using the product, please ensure that you read the safety
precautions described below. Always ensure that the product is used
correctly.
• The safety precautions noted on the following pages are intended
to prevent injuries to yourself and other persons, or damage to the
equipment.
• Be sure to also check the guides included with any separately sold
accessories you use.
Warning
Denotes the possibility of serious injury or death.
•Store this equipment out of the reach of children and infants.
Mistakenly putting the power cord around a child’s neck could result in
asphyxiation.
•Use only recommended power sources.
•Do not attempt to disassemble, alter, or apply heat to the product.
•Avoid dropping or subjecting the product to severe impacts.
•To avoid the risk of injury, do not touch the interior of the product if
it has been dropped or otherwise damaged.
•Stop using the product immediately if it emits smoke, a strange
smell, or otherwise behaves abnormally.
•Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
•Do not let the product come into contact with water (e.g. sea water)
or other liquids.
•Do not allow liquids or foreign objects to enter the product.
This could result in electrical shock or fire.
If liquid comes into contact with the product, unplug it from the outlet and
consult your retailer or a Canon Customer Support Help Desk.
Before Use
• Images printed with this product are to be used for personal enjoyment.
Unauthorized printing of copyrighted material is prohibited.
• The printer warranty is valid only in the country or area of purchase. In
case of printer problems while abroad, return to the area of purchase
before contacting a Canon Customer Support Help Desk.
• Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specifications, in rare cases some pixels may be defective or may
appear as red or black dots. This does not constitute a malfunction or
affect printed images.
• The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before use.
Conventions in This Guide
• In this guide, the printer is referred to as “SELPHY” or “the printer”.
• Icons are used in this guide to represent buttons on SELPHY. Refer to
“Controls” (=
6) for details.
• On-screen text or icons are shown in square brackets, as in [ ].
•
: Important information you should know
•
: Notes and tips for expert use
• =xx: Pages with related information (In this example, “xx” represents a
page number.)
• Instructions in this guide apply to the printer under default settings.
• For convenience, all supported memory cards are simply referred to as
“memory card”.