Filter
Top Products
Advanced Printing
16
1 Set up the printer.
2 Turn on the printer.
3 Load the paper into the paper rest.
4 Connect the digital camera to the printer.
(1) Make sure the camera is turned off.
(2) Connect the camera to the printer using the USB cable (for connection to a
computer) supplied with the camera.
(3) Turn on and set up the camera for direct printing.
When the connection between the camera and printer has been established, the
Power lamp on the printer flashes once.
* The power-on sequence may differ depending on the model or brand of the
camera.
Note
When printing photos with the digital camera connected to the
printer, it is advisable to use the AC adapter supplied with the
camera. If you use the camera battery, be sure to charge it fully.
The print head cannot be aligned using the controls of the digital
camera. To align the print head, connect the printer to the computer.
Depending on the model or brand of your camera, you may have to
select a print mode compliant with “PictBridge” before connecting
the camera.
You may also have to turn on the camera or select Play mode
manually after connecting the camera to the printer.
Perform necessary operations according to the instruction manual
supplied with your camera.
When printing from your PC, be sure to unplug the cable connecting
the digital camera.
i9900_QSG_US.book Page 16 Wednesday, January 7, 2004 6:09 PM