Filter
Top Products
108
■Glimpse
Yes
This parameter specifies the comment text string displayed as an overlay on the
applet. If this parameter is omitted, no comment is displayed.
comment
Yes
This parameter specifies the host name displayed in the applet. This value is used as the host name
in messages displayed during connection, etc. If this parameter is omitted, no host name is displayed.
hostname
Yes
This function displays the frame count as an overlay on the video image. Specify "on" or "off". The default value is "off".
show_counter
Yes
This function displays the host name as an overlay on the video image. Specify "on" or "off". The
default value is "off". Note that this parameter is only valid if the "hostname" parameter is specified.
show_hostname
Yes
This parameter specifies the interval (in milliseconds) at which the screen is updated. If
this parameter is omitted, the screen is updated at 5-second intervals. Because the
Glimpse applet is designed to be used for displaying multiple sites as a list, this
parameter is provided as a means of reducing the processing load. Intervals between 0
and 300,000 ms (5 minutes) can be set. If 0 is specified, the interval is not adjusted.
sleep
Yes
Specifies whether or not connection to the camera server should be established
simultaneously with applet startup. Specify either "on" or "off". When "on", a connection
is established simultaneously with applet startup; when "off", no connection is
established when the applet starts up and the character string specified for
no_connect_msg is displayed. The connect() method is called up in order to make
connections.
auto_connect
No
Specify the URL of the HTTP server for applet access. Specify the IP address and
port number that match those specified in the codebase attribute.
url
Yes
Specifies the character string to be displayed while a connection to the camera
server is being established. The default is "now connecting".
connect_msg
Yes
Specifies the character string to be displayed when a connection to the camera
server is disconnected. The default is "disconnected".
disconnect_msg
Yes
Specifies the character string to be displayed when an attempt to connect to the camera
server has failed. The default is "can't connect".
error_msg
Yes
Specifies the character string to be displayed after the applet starts up, if "off" is
specified for auto_connect. The default is "no connection".
no_connect_msg
Yes
Specifies the font size for connect_msg, disconnect_msg, error_msg, and
no_connect_msg, when these messages are displayed. The default is to depend on
the display area.
font_size
Parameter Name
Description
Omissible
Using a Java Viewer to Distribute Videos