Filter
Top Products
140
The Filter dialog box appears. To display only the
logs that match the specified criteria, enter the
criteria below and click OK. If no changes are
required, click Cancel.
2
[Specify Task.]
Select if filtering by task name, then enter the task name.
[Specify Server.]
Select if filtering by server name, then enter the server name.
[Error Type]
Specify the error type when filtering by error type.
● Not Specified
Selecting this item disables priority and code settings.
● Specify Priority.
From Error, Warning, or Information, select the error level to be displayed.
● Specify Code.
Select if only logs with the corresponding identification code are to be displayed,
then enter the identification code.
[Date & Time]
Filters logs by output date and time.
● Specify Start Date & Time.
When this item is selected and a date and time is entered, logs generated after the
specified start date and time are displayed.
● Specify End Date & Time.
When this item is selected and a date and time is entered, logs generated before the
specified end date and time are displayed.
Using VBCollector
To Set Display Criteria...
Choose Filter from the View menu.
1
Displaying logs according to selection criteria
Logs can be filtered according to type, code, or date and time so that only the required information
is displayed.