Filter
Top Products
56
VIEW-Windows 1.21
"Video Transmission Port"
Sets the TCP port number for the VIEW-
Windows 1.21 video transmission protocol.
The default setting is 5111.
"Camera Control Port"
Sets the TCP port number for the VIEW-
Windows 1.21 camera control protocol.
The default setting is 5110.
"Switcher Control Port"
Sets the TCP port number for the VIEW-
Windows 1.21 switcher control protocol.
The default setting is 5120.
"Maximum Number of Clients"
Sets the maximum number of clients that
can be connected using the VIEW-
Windows 1.21 protocol. Enter an integer
between 1 and 10.
"Maximum Frame Rate (fps)"
Sets the maximum number of frames
captured per second under the VIEW-
Windows 1.21 protocol. Enter a real
number between 0.1 and 30.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
■When VIEW-Windows 1.21 is selected
c
Note
Take care when changing port numbers. Port numbers do not need to be
changed in normal use.
Detail Settings
VIEW-Windows is for sale in Japan only, it cannot be used in any other countries.