Filter
Top Products
Troubleshooting
7
151
Message
Explanation
●P003 Memory card error (warning)
AUTOMNT: cannot mount %1 on %2
Mount processing was cancelled due to a memory card error.
%1
Device name
%2
Mount point
Response
Replace the memory card.
Message
Explanation
●P004 Device busy (err)
AUTOMNT: %1: device is busy
The card was unmounted during file access. This does not occur during normal operation.
%1
Device name
Response
If this occurred when administration tools were used to unmount the card, reboot.
Message
Explanation
●P005 Card initialization failed in card slot A (warning)
ENABLER:slota enable err
Card information read from the card inserted in card slot A failed.
Response
Re-insert the card or replace the card.
Message
Explanation
●P006 Card initialization failed in card slot B (warning)
ENABLER:slotb enable err
Card information read from the card inserted in slot B failed.
Response
Re-insert the card or replace the card.
Message
%1
●P009 Memory card read error (err)
PCMCIA ATA Card(Slot%1 sector %2): Read Sector Error
Slot (A|B)
%2
Sector number
Explanation
A sector read error occurred. The card may be damaged.
Response
Check the memory card and, if necessary, reformat the card.
If there is a physical fault on the card, replace the card.
Message
%1
●P010 Memory card write error (err)
PCMCIA ATA Card(Slot%1 sector %2): Write Sector Error
Slot (A|B)
%2
Sector number
Explanation
A sector write error occurred. The card may be damaged.
Response
Check the memory card and, if necessary, reformat the card.
If there is a physical fault on the card, replace the card.
Log Messages