Filter
Top Products
Troubleshooting
7
147
Message
Explanation
Response
●A007 View restriction setting error (warning)
inconsistent view restriction for camera[%1]
The view restrictions settings are corrupted.
The camera control functions on the affected camera cannot be used.
Restore the factory default settings or reset the view restrictions.
%1
Camera number (1-4)
Message
Explanation
Response
●A008 Compatibility error in the view restrictions settings (warning)
unacceptable view restriction for camera[%1]
Even in the telephoto field of view, the view restriction settings cannot be satisfied in the horizontal or vertical direction. When this occurs,
the zoom setting is fixed at the telephoto field of view, and camera head control is prohibited in directions that do not satisfy the permitted field of view restrictions.
Set appropriate values for the view restrictions.
%1
Camera number (1-4)
Message
Explanation
●A010 Camera control driver start and stop (info)
%1 driver for camera[%2] %3
The camera control device was detected and the driver started up,
or a camera control device error was detected and the driver stopped.
%1
Camera type (Canon VC-C1|Canon VC-C3|Canon VC-C4|Canon VC-C4R)
%2
Camera number (1-4)
%3
started|stopped
Message
Explanation
●A011 Camera control device error (warning)
%1[%2] malfunction (%3)
Camera control device I/O error.
%1
Camera type (VC-C1|VC-C3|VC-C4)
%2
Camera number (1-4)
%3
Error (read|write|timeout|...)
Response
There is a malfunction if it does not reset automatically. Contact an authorized
Canon service representative.
Message
Explanation
●A014 Access prohibited due to host restriction (notice)
%1@%2 access denied
Access from the client was denied due to host restrictions . (LS indicates a WebView client.
Normally, the same message is displayed several times.)
%1
Client type (LS)
%2
Client host IP address
Log Messages