Canon VB101 Security Camera User Manual


 
148
Message
%3
A016 Amount of transmitted video data (info)
%1@%2 %3 frames/%4 bytes in %5 seconds
Number of frames
%1
Client type (LS/D | LS/H)
%2
Client host IP address
Explanation
This shows the results of video transmission for a video transmission client.
%4
Number of bytes
%5
Video transmission time
Message
Explanation
Response
A022 Applet archive load failure (warning)
archive/%1 not found
The applet archive file does not exist or is corrupted.
Copy the missing (or damaged) file in the "/archive" applet from the CD-ROM and reboot.
The original applet archive file is in the CD-ROM.
%1
Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip |
imagemap.gif | snapanim.cab | snapanim.zip | digits.gif)
Message
Explanation
A023 Status change of external input devices (err)
a %1 detected at %2
A change was detected at external device terminal In1 or In2. "front edge" denotes OFF ON,
"rear-edge" denotes "ON OFF, "pulse" denotes OFF ON OFF,
and notch denotes ON OFF ON. "pulse" and "notch" are brief (10-20 milliseconds)
ON and OFF periods detected during OFF and ON states respectively.
%1
external device input change (front-edge | rear-edge | pulse | notch)
%2
external device terminal (In1 | In2)
Log Messages
Message
Explanation
A024 Picture recording suspended and restarted (notice)
picture recording %1
Picture recording stopped because of error or picture recording restarted because of error recovery.
Error details will be output as A025.
%1
suspended | recovered