Filter
Top Products
111
8
8-6-6 TC/UB
8-6-7 UMID SET/INFO
<Note>
Please refer to [4-5-6 Setting the UMID Information] for the
UMID information setting.
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
UB MODE USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER:Select UB value set in the LCD
section.
TIME: Select local time (hours, minutes,
seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
EXT: Slaved to UB from TC-IN. If reading
fails, USER value is retained.
TCG: TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
REGEN
:Read out value stored in the card
and record value continuously.
–CUF–
VITC UB MODE USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
TIME: Select local time (hours, minutes,
seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
TCG: TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
REGEN
:Read out value stored in card and
record value continuously.
–CUF–
TCG SET HOLD ON
OFF
ON/OFF switching for the feature that
always starts recording (when the power is
turned ON again) the TCG value that was
set before the power is turned OFF.
–CUF–
FIRST REC TC REGEN
PRESET
For the first recording after the power is
turned on, a P2 card is inserted and then
switching from this P2 card to another
recording-target P2 card is performed,
select whether or not to regenerate the time
code as the value on the new P2 card.
REGEN:
For clips recorded on the recording-
target P2 card, regenerate the time
code as the time code of the clip that
has the most recent date and time.
PRESET:
Use the camera-recorder’s internal
time code.
<Note>
Set the date and time accurately. For
guidance on setting, see [4-5-2 Setting the
Internal Clock’s Date and Time].
–CUF–
P.O FF LC D
DISPLAY
ON
OFF
Select whether or not to display the time
code setting and counter indication on the
LCD monitor when the power is turned OFF.
ON: Display setting and indication while
the power is turned OFF.
OFF: Power-down LCD monitor while
camera power is turned OFF. Setting
and indication disabled.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
TC OUT TCG
TCG/TCR
Select the time code to be output to the time
code output connector.
TCG: Always output time code generator
value.
TCG/TCR:
Display time code generator value in
E-E mode, and time code reader
value in V-V mode.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
COUNTRY NO-INFO
Input the user’s country. NO-INFO is
displayed until the input completes.
–CUF–
ORGANIZATION
NO-INFO
Input the user’s organisation or company
name. NO-INFO is displayed until the input
completes.
–CUF–
USER NO-INFO
Input the user name. NO-INFO is displayed
until the input completes.
–CUF–
DEVICE NODE
Indicate the product ID number.
–––––