Filter
Top Products
58
6 Turn the JOG dial button until a desired character appears.
The characters that appear are switched in the following
order:
Space:
Ð
Alphabetical characters: A to Z
Ð
Numerals: 0 to 9
Ð
Symbols: ', >, <, /, -
7 Press the JOG dial button to accept a desired character.
8 Turn the JOG dial button to move the cursor to the next digit
(clockwise), and repeat Steps
6 - 7 to set characters (up to
eight characters).
9 When the title is set, turn the JOG dial button to move the
cursor to [:].
10 Press the JOG dial button to return the cursor to the option
[TITLE:].
11 Turn the JOG dial button to move the cursor to the option
[WRITE].
12 Press the JOG dial button to display the following message:
The data will not be written if any of the following messages
appears when the JOG dial button is pressed:
13 Turn the JOG dial button to move the cursor to YES. Then,
press the dial button.
When the data has been written, the following message
appears:
14 To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ-
SPX900E is indicated at the top and bottom of the
viewfinder screen.
To write data on a selected file:
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
:5,7("
<(6
12
7,7/(
Error message Remedy
WRITE NG
NO CARD
(No SD card inserted.)
Insert an SD card.
WRITE NG
FORMAT ERROR
(SD card not properly formatted.)
The card has not been formatted
using the AJ-SPX900E.
Replace the card.
WRITE NG
ERROR
(SD card not writable.)
The card may be defective.
Replace the card.
WRITE NG
WRITE PROTECT
(SD card write-protected.)
Remove the card and disable the
protect.
WRITE NG
CANNOT ACCCESS
(SD card not accessible).
Example: The SD card is not
accessible because it is being
played back.
After the operation in process,
format the card.
WRITENG
CARD FULL
(SD card has no free space.)
The card is not writable because it
has no free space. Delete
unwanted files or replace the card
with a new one.
:5,7(2.