Celestron SPX900 Camcorder User Manual


 
73
5
When Using the Unislot
®
Wireless Receiver
1 Remove the cover to insert the wireless receiver and
secure it with the screws.
2 Set the AUDIO IN switch to [W.L.] depending on the audio
channel to be recorded.
5-4-3 When Using Audio Devices
1 Connect the audio device to the AUDIO IN jack with the
XLR cable.
2 Set the AUDIO IN switch to [REAR] for the channel to which
the XLR cable is connected.
3 Set the LINE/MIC/+48V selector switch on the rear panel to
[LINE].
5-5 Mounting the Camera on a
Tripod
When mounting the camera on a tripod, use the optional tripod
attachment.
1 Mount the tripod attachment on the tripod.
<Note>
Select an appropriate hole in the attachment, taking into
account the center of gravity of the camera and tripod
attachment combined.
Also, make sure that the diameter of the selected hole
matches the diameter of the pan head screw.
2 Mount the camera on the tripod attachment.
Slide the camera forward along the grooves until you hear a
“click”.
Removing the Camera from the Tripod Attachment
While holding the red lever down, move the black lever in the
direction of the arrow, and slide the camera backward to remove
it.
<Note>
If the tripod attachment pin does not return to its original position
after the camera has been removed, hold the red lever down and
move the black lever in the direction of the arrow again, in order
to return the pin to its original position.
Please note that the camera cannot be mounted if the pin
remains in the center.
LINE/MIC/+48V
Selector Switch
AUDIO IN Jack
AUDIO IN Switch
Pan head
Tripod Attachment
Tripod Attachment
Red Lever Black Lever