Filter
Top Products
79
6
6-5 Switching the Thumbnail
Display
The display can be switched so that only those clips matching
the specified conditions are displayed in the thumbnail screen.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the MENU BAR button. The pointer moves to the
menu bar.
3 Move the pointer over THUMBNAIL and press the SET
button to select it. A sub-menu appears. Switch the
thumbnail display by selecting one of the following items:
ALL CLIPS:
Display all clips.
SELECTED CLIPS:
Display randomly selected clips.
MARKED CLIPS:
Display clips with shot marks attached.
VOICE MEMO CLIPS:
Display clips with voice memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted in the
specified slot.
When this item is selected, SLOT1 to SLOT5 are displayed
as a sub-menu. Select the desired slot to display the clips.
SET UP:
Please refer to [6-12 Setting the Thumbnail Display Mode]
for information about this item.
EXIT:
Close the sub-menu.
6-6 Shot Mark
A shot mark can be added to a clip thumbnail to distinguish this
clip from the others.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Use the cursor buttons to move the pointer over the clip to
which you want to attach a shot mark.
3 Press the Shot Mark button.
4 A shot mark will be attached to the clip thumbnail under the
pointer.
To delete a shot mark, reposition the pointer over the clip
and press the Shot Mark button.
<Notes>
z A shot mark can be attached during recording. Please refer to
[3-9 Shot Mark Function] for more information.
z When adding a shot mark to (or deleting the shot mark from) a
clip recorded across multiple P2 cards, do this with all these
P2 cards inserted into P2 card slots.
MENU BAR Button
Shot Mark Button