Filter
Top Products
98
8-3-8 SKIN TONE DTL 8-3-9 KNEE/LEVEL
<Note>
The items indicated by are the setting items for PAINT MENU
SW() R/W in the <SD CARD R/W SELECT> screen. The items
without are the setting items for PAINT MENU LEVEL R/W.
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information.
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
SKIN TONE
DTL
ON
OFF
Set the skin tone DTL to ON or OFF.
SCUFE
SKIN TONE
ZEBRA
ON
OFF
ON/OFF switching for ZEBRA within the
SKIN TONE range.
SCUFE
SKIN DTL
CORING
0
:
5
:
7
Adjust the effect of SKIN TONE DTC
CORING.
SCUFE
SKIN TONE
GET
Used when obtaining the target hue for
SKIN TONE DTL. Align the center marker
and the target object with each other.
–––––
Y MAX 000
:
190
:
255
Set the maximum value of the brightness
signal to which SKIN TONE effect is
enabled.
SCUFE
Y MIN 000
:
010
:
255
Set the minimum value of the brightness
signal to which the SKIN TONE effect is
enabled.
SCUFE
I CENTER 000
:
022
:
255
Set the center position on the I axis (the
area where SKIN TONE is enabled).
SCUFE
I WIDTH 000
:
010
:
255
Set the area width where SKIN TONE is
enabled along the I axis above and below
the I CENTER.
SCUFE
Q WIDTH 000
:
005
:
255
Set the area width where SKIN TONE is
enabled along the Q axis above and below
the I CENTER.
SCUFE
Q PHASE –128
:
+000
:
+127
Set the phase in the area where SKIN TONE
is enabled based on the Q axis.
SCUFE
R-Y
B-Y
Q-WIDTH
I-WIDTH
Q-PHASE
I-CENTER
Y
Y-MAX
Y-MIN
0
+ direction
= SKIN TONE AREA
Items/
Data Saved
Adjustable
Range
Remarks
MASTER PED –200
:
+020
:
+200
Set the master pedestal.
SCUFE
MANUAL
KNEE
ON
OFF
Set the mode when the AUTO KNEE switch
is OFF. The KNEE POINT/SLOPE set value
is enabled when this setting is ON.
SCUFE
KNEE POINT 70.0%
:
85.0%
:
107.0%
Set the KNEE POINT position in 0.5% steps.
SCUFE
KNEE SLOPE 00
:
50
:
99 (98)
Set the KNEE SLOPE.
0 setting is equal to KNEE OFF.
<Note>
The adjustable range when using the AJ-
EC3E is from 00 to 98.
SCUFE
WHITE CLIP ON
OFF
Set the WHITE CLIP feature to ON or OFF.
The WHITE CLIP LVL set value is enabled
when this setting is ON.
SCUFE
WHITE CLIP
LVL
90%
:
105%
:
109%
Set WHITE CLIP LEVEL.
SCUFE
A.KNEE POINT 80%
:
85%
:
107%
Set the AUTO KNEE POINT position in
0.5% steps. This setting is enabled when the
OUTPUT/AUTO KNEE selector switch is set
to CAM.AUTO KNEE ON.
SCUFE
A.KNEE LVL 100
:
105
:
109
Set the AUTO KNEE LEVEL.
SCUFE
A.KNEE
RESPONSE
1
:
4
Set the AUTO KNEE response speed.
The smaller the setting value, the faster the
response speed.
SCUFE
– direction