Filter
Top Products
59
4
To read data on an SD card:
1 Turn the JOG dial button to move the cursor to the option
[SD CARD READ/WRITE]. Then, press the dial button.
2 Turn the JOG dial button to move the cursor to the menu
option [R. SELECT]. Then, press the dial button.
3 Turn the JOG dial button to select a desired number (1 - 8).
Then, press the dial button.
4 Turn the JOG dial button to move the cursor to the option
[READ].
5 Press the JOG dial button to display the following message:
6 Turn the JOG dial button to move the cursor to YES. Then,
press the dial button.
When the data has been read, the following message
appears:
The data will not be read if any of the following messages
appears when the JOG dial button is pressed:
7 To exit the menu, press the MENU button.
The settings menu will be replaced by status indications for
the AJ-SPX900E.
To select a file number:
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
To read data on a selected file:
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
5($'"
<(6
12
Error message Remedy
READ NG
NO CARD
(No SD card inserted.)
Insert an SD card.
READ NG
FORMAT ERROR
(SD card not properly formatted.)
The card has not been formatted
using the AJ-SPX900E.
Replace the card.
READ NG
NO FILE
(No file found.)
Write file data.
READ NG
ERROR
(SD card not readable.)
Only data written with the AJ-
SPX900E is readable.
READ NG
CANNOT ACCCESS
(SD card not accessible).
Example: The SD card is not
accessible because it is being
played back.
After the operation in process,
read data.
5($'2.