Filter
Top Products
6-12
Using Custom and Advanced Features
Setting the Power Mode
Your camera is set at the factory to the “Normal” power
mode. This means that the camera remains on after you take
a picture with the LCD screen. You can change the power
setting to “Save” if you want the camera to shut off
automatically after you take a picture with the screen. Follow
these steps:
1
With the Settings menu selected, press the SEL button.
Icons for each setting appear on the screen, as shown on
page 6-11.
Press the button until the power icon is
highlighted.
2
Press the SEL button to choose Save or Norm.
3
Press the ESC button to save your setting and return to
View or Playback mode.
Setting the Language
You can choose from two languages for information
displayed on the LCD screen. Make sure the camera dial is
turned to
Play and follow these steps to select English:
1
Press the SEL button to display the LCD screen menus.
2
Press the or button until you see the Language
menu:
3
Press the SEL button until ENG (English) is
highlighted.
4
Press the ESC button to save your selection.
5
Turn the camera dial to Off.
Lily.book Page 12 Tuesday, March 2, 1999 4:06 PM