Filter
Top Products
Using Advanced Camera Features
1-9
A
B
1
3 Follow steps 1 through 5 on page 1-8 to select
continuous shooting.
4 Press the timer button.
The timer icon appears on the display panel.
5 Press the shutter button.
The timer icon and the red timer light on the front of
the camera flash slowly for 8 seconds. Then they flash
rapidly for 2 seconds before the shutter is released.
You have 10 seconds to get ready for “action” in front of
the camera.
The camera beeps 16 times as it captures your images,
and the red light flashes as the images are processed.
6 To switch back to normal picture taking, follow steps 2
and 3 above, but turn off the continuous mode.
Taking Quick Shots
You can take as many images as the camera can temporarily
store with quick shot mode. Normally, the camera takes a
few seconds to process each image and you have to wait to
take the next picture. In quick shot mode, the camera stores
the images in its 4MB DRAM while you keep taking
pictures. It saves the images to the internal memory or
CompactFlash card after you are done.
Make sure the camera dial is set to
View, and follow these
steps to use quick shot mode:
1 Press the SEL button to display the menus.
2 Press or to display the Conditions menu:
timer
button
Lily.book Page 9 Tuesday, March 2, 1999 4:06 PM