Filter
Top Products
Playing Back Photos
2-7
A
B
2
4 Use the and buttons to move the display left
or right. To move the display up or down, hold down
the
Function button and press the or buttons.
The icon indicates which section is displayed.
5 Press the ESC button to return to normal view. Press
ESC again to exit the menu.
Erasing Pictures
The LCD screen provides two different methods for deleting
images after you play them back:
◗ You can delete the currently displayed picture
◗ You can select pictures for deletion or “lock” (protect)
them from deletion
You can also erase photos through your software when the
camera is connected to your computer. For instructions, see
Getting Started and Chapter 3.
Erasing the Currently Displayed Picture
Make sure the camera dial is set to Play and the image you
want to erase is displayed. Then follow these steps:
1 Hold down the Function button and press the ESC
button.
You see the following message on the LCD screen:
2 Press the SEL button to erase the picture. The picture is
erased and the screen returns to playback mode.
NOTE
If you try to erase a locked photo , you see a warning message.
Press any button to clear the message. See pages 2-9 to 2-12 for
instructions on locking and unlocking images in the camera.
Lily.book Page 7 Tuesday, March 2, 1999 4:06 PM