Filter
Top Products
38
Configuring for a Network
Before you can use your printer on a network, you must configure your computer as
described in the following sections.
Windows 95 and Windows 98 Users
If your computer is on a Windows 95 or Windows 98 network and you want other
users to share the printer connected to it, you need to:
■ set up the system connected to the printer (host system) so the printer can be
shared
■ define a path to the printer on each client computer
Before following the steps here, make sure you’ve installed the printer software on all
the computers that will use the printer. See the Start Here card for instructions.
This section describes how to use your printer as a shared
printer on a network. To connect your printer directly to a
network without setting it up as a shared printer, consult your
network administrator.
Setting Up the Host System
1. Click Start, point to Settings, and select Control Panel.
2. Double-click Network, then click the File and Print Sharing button.
3. Click the I want to be able to allow
others to print to my printer(s)
checkbox
and click OK.
4. In the Network window, click OK.
basics.book Page 38 Friday, January 8, 1999 11:57 AM