Epson 900 Photo Printer User Manual


 
51
Examining the Nozzle Check Pattern
Examine the nozzle check pattern
you print. It should look something
like this:
Each staggered horizontal and straight
vertical line should be complete, with
no gaps in the dot pattern. If your
printout looks okay, you’re done. If
any dots are missing, as shown to the
right, clean the print head again; see
page 48 for instructions.
Replacing an Ink Cartridge
When the
B black or
A color ink out light flashes, the indicated cartridge is low on
ink. This is a good time to make sure you have a new cartridge. When the light stays
on, the cartridge is empty and you need to replace it. You cannot print if either ink
cartridge is empty.
You can also check your ink levels using Status Monitor 2 (not available for
Windows 3.1). See your electronic EPSON Stylus COLOR 900 Manual for details.
Use these EPSON ink cartridges within six months of installing them and before the
expiration date on the package:
Black ink cartridge T003011
Color ink cartridge T005011
To ensure good results, use genuine EPSON ink cartridges
and do not refill them. Other products may cause damage to
your printer not covered by EPSON’s warranty.
missing dots
missing dots
basics.book Page 51 Friday, January 8, 1999 11:57 AM