Filter
Top Products
34
Remove the Used Photo Cartridge
Make sure you have a new PictureMate photo
cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one
session.
Caution: Before you replace the cartridge, read the “Photo
Cartridge Safety Instructions” on page 53.
1 If PictureMate is on, press the On button to
turn it off.
2 Wait until the LCD screen goes blank, then
disconnect the power cable and USB cable if
connected.
3 Flip the handle over to the front.
4 Open the cartridge door on the back of
PictureMate.
5 Move the lever to the Release position by sliding
it in the direction shown. This releases the
cartridge.
PictureMate.book Page 34 Wednesday, August 18, 2004 2:48 PM