Filter
Top Products
MR-HD100 Functions
MR-HD100 Media Recorder
87
For more about LCD display symbols and text, see LCD Display
Symbols and Text
on page 97.
NORMAL Record
This is the standard recording mode.
• All control is from the MR-HD100 front panel.
Initially, the
Home screen displays STOP.
•Pressing Record
puts the MR-HD100 into record mode.
•Pressing Pause
II stops recording.
•Pressing Pause
II a second time resumes recording to the
original video clip.
•Pressing Stop
stops recording puts the MR-HD100 into
STOP mode.
RETRO CACHE
Retro Cache is available in all control modes.
The Retro Cache mode insures that important material at the
very start of a recording session is captured. Retro Cache stores
in the on board memory a continuous loop of video captured by
the video camera during pauses.
To initiate Retro Cache:
1. Pressing Record
and the MR-HD100 goes into REC-
PAUSE
mode and starts caching video.
When caching, the Home screen displays (
STOP/REC
PAUSE
) and a C.
2. Pressing Record
a second time, begins active recording
at the last frame stored in the cache. The resulting video
clip has the cached video at the beginning.
Setting Length of RETRO CACHE
1. Go to the SETUP Menu.
See
RETRO CACHE on page 104.
2. Select the item
RETRO CACHE.
3. Select the time field.
Use the scroll wheel to set the length of video that
the
RETRO CACHE should store.
Set the length of video in 1-second increments from 0.
The maximum time allowed 10 seconds.