Filter
Top Products
MR-HD100 with Other Devices
MR-HD100 Media Recorder
144
MR-HD100 to Wired (Ethernet) Network
This procedure requires the use of a USB 2.0 to Ethernet Extender.
1. With the MR-HD100 powered off, use an USB 2.0 to
Ethernet Extender to connect the MR-HD100 to the network.
2. Power on the MR-HD100 and wait for the Home screen to
appear.
3. Go to the
SETUP menu and locate IP ADDR.
If the network employs DCHP, the
SETUP options IP ADDR,
IP MASK, BROADCAST, and GATEWAY display the network
assigned addresses.
4. Open an IE or Safari web browser.
5. Enter the MR-HD100’s
IP ADDR into the browser’s IP
address bar and enter.
The MR-HD100
Templates web page opens.
MR-HD100 and FTP
To access the MR-HD100 via FTP, follow the same steps above.
In Step 5, enter the address
ftp://FS:FS@ and then the IP ADDR
from SETUP.
For more information about FTP password, see
FTP PASS on
page 115.