Filter
Top Products
MR-HD100 Functions
MR-HD100 Media Recorder
101
TC SET
Default is 00:00:00:00.
The Timecode Set parameter stores a user defined timecode in the
MR-HD100’s non-volatile memory. This value is available for use
by the MR-HD100 immediately after exiting
TC SET.
• TC FREE RUN
The MR-HD100 uses this value on the next recording after it is
set in
TC SET.
• TC REGEN
This is the starting value when using an empty hard disk
drive for recording.
• TC REC RUN
This is the value used to begin every recording session after a
power cycle.
TC SET and UB SET Can Be Set at the Same Time
Both parameters, TC SET and UB SET, may be set.
SETUP
TC SET