Filter
Top Products
MR-HD100 Functions
MR-HD100 Media Recorder
89
SNAP Record DV modes only
Use Snap to record individual frames. In Snap mode, pressing
record
captures a single frame. Each record Snap session
captures the individual frames into a single file. To start a new
Snap record session place the unit in
STOP between Snap
records.
• Snap recording is available only in DV modes of operation.
•Use
SNAP in EXTERNAL and SYNCRO control modes.
• Removing power from the MR-HD100 in the midst of a
Snap recording session causes the MR-HD100 to return to
Normal recording mode when it powers back up.
TIMELAPSE DV mode only
Timelapse provides the ability to record a single frame at
specific time intervals, for example one frame per minute,
00:01:00:00. Time Lapse applications can include capturing the
traffic on city streets, the growth of a plant from seed to
maturity, and construction projects.
Features of Timelapse function include:
• All the captured frames are recorded in a single clip.
• The time between recording periods can be set in frames,
seconds, minutes, and hours.
The maximum time between recorded frames is 24 hours.
Setting Duration of TIMELAPSE
1. Go to the SETUP Menu.
2. Select the item
TIMELAPSE.
3. Select the time field.
Use the scroll wheel to set the length of time
between frame captures.
Set the length of video in 1-frame increments. The
maximum time between frames is 24 hours.
Another Method to Capture Single Frames
An alternative to SNAP is EXT CTL FRAME. For more
information see EXT CTL
on page 100.