Filter
Top Products
74 HP Photosmart M407 User’s Manual
3 Your camera came with a
special USB cable for
connecting the camera to a
computer. Connect the
larger end of that USB cable
to the computer.
4 Open the rubber door on the
side of the camera and
connect the small end of the
USB cable to the USB
connector on the camera.
5 Turn on the camera. The HP Image Transfer software will
launch on your computer. If you have set the software to
automatically transfer the images in the camera, the images
will automatically transfer to the computer. Otherwise, in the
Transfer Images from Camera/Card screen, click Start
Transfer. The images are transferred to the computer, and
then if there are any still images that were previously
selected for HP Instant Share destinations (page 63), those
actions are started.
6 When the Image Action Summary screen appears
on the computer, you can disconnect the camera from
the computer.