Filter
Top Products
80 HP Photosmart M407 User’s Manual
5 Use one of several ways to exit the Setup Menu. You can
select the EXIT menu option and press Menu/OK. After
you have used the Setup Menu, you can also navigate to
another menu via the menu tabs at the top of the Image
Display. If you want to switch to another camera state, press
the appropriate button on the back of the camera.
Display Brightness
This setting allows you to adjust the brightness of the Image
Display for the viewing conditions. You can use this setting to
increase the brightness for harsh lighting environments, or
reduce the brightness to extend battery life.
The default Display Brightness setting is Medium.
1 In the Setup Menu (page 79), select Display Brightness.
2 In the Display Brightness sub-
menu, highlight the brightness
level you prefer for the Image
Display. The new setting is
applied to the Live View screen
behind the menu so you can see
the effect the setting will have on
the display brightness.
3 Press Menu/OK to save the setting and return to the
Setup Menu.
The new setting remains in effect until it is changed again, even
when you turn the camera off.