Filter
Top Products
76 HP Photosmart M407 User’s Manual
2 Connect your camera to the
printer.
• If you are printing directly
to an HP Photosmart printer
that does
not
display the
PictBridge logo (see logo
below), use the special USB
cable for connecting the
camera directly to an
HP Photosmart printer.
Connect the square end of that USB cable to the
HP Photosmart printer.
• If you are connecting the camera to a printer
displaying the PictBridge logo (see logo on
right) from HP or another manufacturer, do
the following:
a. Make sure the camera’s USB Configuration setting is
set to Digital Camera (see USB Configuration on
page 83).
b. Using the USB cable that you would normally connect
between the camera and the computer, connect the
larger, flat end of the USB cable to the corresponding
connector on the PictBridge printer.
3 Open the rubber door on the side of the camera and
connect the small end of the USB cable to the USB connector
on the camera.