Filter
Top Products
84
12. FEATURES OF THE CAMERA SECTION
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
VTR
CAM
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
VTR
CAM
12-6 Switch Setup According to Illumination and Subject
Various switch settings are performed to accommodate the conditions of the illumination and the subject when shooting.
SWITCH FUNCTIONS
1AUTO IRIS LEVEL switch
This switch allows the reference value for the auto iris
adjustment to be changed according to the lighting condition.
BACK L : When the subject is in backlit conditions.
Opens the iris wider than the standard setting.
NORMAL: Normal lighting condition.
SPOT L : When the subject is under a spotlight.
Closes the iris narrower than the standard setting.
■The level of auto iris can be set in SPOT L/BACK L on the
CAMERA OPERATION menu screen when the AUTO IRIS
switch is set to BACK L or SPOT L. ☞ See page 69.
2BLACK stretch/black compress switch
This switch makes the image easier to see by varying the
black gain.
BLACK STRETCH : Boosts the gain of black areas to
improve the reproducibility of black.
NORMAL : Normal black gain.
BLACK COMPRESS
: Attenuates the gain of black areas to
make the image sharper.
The FAS function provides a wide range of compatibility with
shooting conditions that varies as you move between indoors
and outdoors or between bright and dark locations. It eliminates
the need to change the switch and filter positions every time
you move.
The FAS function provides an integrated control of the ALC
(Automatic Level Control), Auto iris and FAW (Full-time Auto
White balance) functions.
1.
Simply press the FULL AUTO button to enter the FAS mode,
in which the FULL AUTO indicator lights and “FAS” is
displayed to the right in the viewfinder or LCD monitor.
2.
Pressing the FULL AUTO button again cancels the FAS
mode and turns the FULL AUTO indicator off.
■ Automatic Setting Contents
● If you have been displaying the color bars, the screen is
switched automatically to the camera image.
● The auto iris adjustment mode is entered even if the iris mode
switch of the lens is set to manual.
● The GAIN switch and WHT.BAL switch settings are defeated
in the FAS mode.
● The LOLUX button setting is active even in the FAS mode.
However, the ALC and EEI are defeated in the LOLUX mode,
in which only the auto iris adjustment and FAW are used.
● All of the previous setting contents are recalled when the
FAS mode is cancelled.
● The SMOOTH TRANS function is defeated during switch to
the FAS function.
Operation
FULL AUTO SHOOTING (FAS) FUNCTION
● When the power is turned on while the camera is in the
FAS mode, it takes about 10 seconds before the
automatic adjustment of FAS is completed.
CAUTION:
AUTO IRIS
LEVEL switch
BLACK stretch/black
compress switch
FULL AUTO indicator FULL AUTO/shooting button
85
12. FEATURES OF THE CAMERA SECTION
The contour emphasis in the skin color areas of the video signal can be controlled and made to appear gentle and smooth.
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
1
8
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
––– MENU –––
CAMERA OPERATION..
CAMERA PROCESS..
AUDIO/VIDEO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET CANCEL
EXIT
12-7 How to Use Skin Detail
––– CAMERA PROCESS –––
MASTER BLACK NORMAL
DETAIL NORMAL
DTL.V/H BALANCE NORMAL
SKIN DTL.DETECT ON
SCAN VIDEO
KNEE POINT 100%
WHITE CLIP 108%
ADVANCED PROCESS..
PAGE BACK
––– ADVANCED PROCESS –––
CINE MODE OFF
COLOR MATRIX STD
GAMMA NORMAL
FLARE<R> NORMAL
FLARE<B> NORMAL
SKIN COLOR ADJUST..
PAGE BACK
SKIN COLOR ADJUST screen
––– SKIN COLOR ADJUST –––
ERROR
SKIN COLOR DET. EXECUTE
SKIN COLOR RANGE NORMAL
PAGE BACK
Detection
area
SHUTTER
MENU
CAMERA PROCESS menu screen
TOP MENU screen
Cursor
ADVANCED PROCESS screen
SKIN COLOR ADJUST screen
2. 3. 4. 5. 6.
7. 8.
SHUTTER dial
1.
STATUS button
■
Setting the Color and Range of the Skin Detail
Function
1.
Press the STATUS button for about 1 second to display the
TOP MENU screen.
2.
Tu rn the SHUTTER dial downward to align the cursor (
)
with the CAMERA PROCESS item. Then press the
SHUTTER dial in the direction of the arrow to display the
CAMERA PROCESS menu screen.
3.
Tu rn the SHUTTER dial downward to align the cursor (
)
with the ADVANCED PROCESS item. Then press the
SHUTTER dial in the direction of the arrow to display the
ADVANCED PROCESS menu screen.
4.
Tu rn the SHUTTER dial downward to align the cursor (
)
with the SKIN COLOR ADJUST item. Then press the
SHUTTER dial in the direction of the arrow to display the
SKIN COLOR ADJUST screen.
● The frame shown on the screen indicates the detection
area of the skin detail function.
5.
When the cursor (
) is aligned with the SKIN COLOR DET.
item, the SHUTTER dial is pressed in the direction of the
arrow and EXECUTE selected, the skin color detection
mode is activated.
6.
Shoot so that the area with the color that you want to detect
is brought within the detection area frame. To decide on the
color for the detection, press the SHUTTER dial to set SKIN
COLOR DET. to STOP.
● The color is recognized as a color that the skin detail
function works with.
● The areas recognized by the skin detail function appear
with superimposed zebra patterns.
● If the color is not recognized as a color that the skin detail
function works with, “ERROR” is displayed on the screen.
7.
If you want to change the color range recognized by the
skin detail function, perform the following operations.
Set the SKIN COLOR DET. item to EXECUTE.
1
Tu rn the SHUTTER dial to align the cursor (
) with SKIN
COLOR RANGE, and then press the SHUTTER dial in the
direction of the arrow.
a The area with the setting value starts blinking, and
the value can now be changed.
2
Tu rn the SHUTTER dial up or down to widen or narrow the
color range.
● Adjust the range while observing the zebra patterns.
3 To decide the color range, press the SHUTTER dial in
the direction of the arrow.
a The setting value stops blinking but remains lit.
8.
To stop the SKIN COLOR ADJUST operation, align the
cursor (
) with PAGE BACK and press the SHUTTER dial
in the direction of the arrow.