Filter
Top Products
EN 31
Setting Up the Camera Using RM-P2580 (continued)
PRIVATE MASK Setup
Use the PRIVATE MASK screen to set up the private mask
function, which grays out areas that are not required to be
included in the monitored picture. Up to four private masks
can be set per screen, and up to eight private masks can be
set in total.
1 Select the camera. (A RM-P2580 AINSTRUCTIONSB)
CAMERA buttonNNumeric key (Camera Number)NENTER button
●The picture of the selected camera is output.
2 Display the MENU screen. (A pg. 21, steps 2 to 4)
MENU button (3 sec.) N Select ACAMERA..B using the PAN lever N
SET button.
●The AMENUB screen will be displayed.
3 Tilt the PAN lever up or down to move the cursor (E) to
ACAM. FUNCTION 1..B and press the SET button.
●The ACAMERA FUNCTION 1B screen is displayed.
4 Move the cursor (E) to APRIVATE MASK..B and press the SET
button.
The APRIVATE MASKB screen is displayed.
5 Select the private mask function ON or OFF.
Turn the private mask function on or off by setting the AMODEB item in
the submenu to ON or OFF (Factory setting: OFF)
6 Select the mask number.
Select the private mask number from MASK No. 1 to No. 8 and move the
cursor to the item AMASK EDIT..B. A maximum of 4 can be set within one
picture.
If an already set mask number is selected, the (M) mark will be
displayed.
7 Edit the masking area.
●Move the cursor to AMASK EDIT..B and press the SET button to display
the AMASK EDITB screen. (The masked area will be displayed as a
grayed-out area.)
●Tilt the PAN lever to move the grayed-out area to the center of the area
to be masked.
●Press the TELE button and WIDE button to set the masked area size.
8 Press the MENU button.
●The screen returns to the APRIVATE MASKB screen.
●To delete a private mask area, select AMASK DELETE..B, move the
cursor to ADELETEB and press the SET button. The PRIVATE MASK
menu reappears after the data has been deleted.
●To cancel deletion, select ACANCELB and press the SET button.
9 Repeat steps 6 to 8 for each additional mask area.
10 Press the MENU button.
The screen returns to the ACAMERA FUNCTION 1B menu.
8 CAUTIONS
●It is not possible to set five or more masks in adjacent areas. (Even
when this is attempted, the masked area that is required to be set will
not be displayed.)
●MASK cannot be set at lower than approx. 40
° in the horizontal
direction. (The masks for new settings are not displayed.)
8 CAUTIONS
●There may be cases, depending on the camera direction and zoom position, in which an object is captured from within the
private mask area. After setting the private mask, be sure to vary the camera direction and zoom position in order to confirm
that the camera does not capture objects from within this area.
●The Private Mask function cannot be carried out during the initializing process immediately after the power is turned on.
●When 4 masking areas are set within the same screen, setting of another mask in an adjacent area may fail. In this case,
adjust the angle of view settings.
●When 4 marks are set on one same screen, the next mark might not be possible to set on the nearest area. In that case, set
the angle of screen again.
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILTLENS
CAMERA/POSITION
CAMERA POSITION
REMOTECONTROLUNIT
RM-P2580
ALARM
POWER
KEYLOCK
TELE
button
MENU button
CAMERA button
SET button
PAN lever
WIDE button
ENTER
button
Numeric
keys
CAMERA FUNCTION1
V. PHASE - - -
POS. TITLE LOC. UP-L
PRIVATE MASK..
MANUAL DISPLAY ON
<
MENU
>
EXIT
<
SET
>
SUB MENU
CAM. FUNCTION 1 screen
PRIVATE MASK
MODE OFF
MASK No. 1 (M)
MASK EDIT ..
MASK DELETE ..
<
MENU
>
RETURN
PRIVATE MASK screen
Already
set.
MASK EDIT
<
MENU
>
RETURN
MASK EDIT screen