Filter
Top Products
36 EN
Setting Up the Camera Using RM-P2580 (continued)
AREA DISPLAY Setup (DIRECTION)
Upon setting N (North), which is the standard axis, the 360°
panning range will be equally divided into 8 areas. Perform
manual panning of the camera and each area will be
displayed as N, NE, E, SE, S, SW, W, NW.
1 Select a camera. (ARM-P2580 AINSTRUCTIONSB)
CAMERA buttonNNumeric key (Camera Number)NENTER button
●Video images of the selected camera will be output.
2 Display the MENU screen. (A pg. 21, steps 2 to 4)
MENU button (3 sec.) N Select ACAMERA..B using the PAN lever NSET
button.
●The AMENUB screen will be displayed.
3 Move the PAN lever upward/downward to shift the cursor (E)
to the ACAM. TITLE/ALARM..B item, followed by pressing the
SET button.
●The ACAMERA TITLE/ALARMB screen will be displayed.
4 Shift the cursor (E) to the AREA DISPLAY item, and move
the PAN lever leftward/rightward to select ADIRB.
5 Press the SET button.
●The ADIRECTION STANDARD AXISB screen will be displayed.
6 Move the PAN lever leftward/rightward to set the direction
(N) of the standard axis.
7 Press the MENU button.
●This sets the start position of the direction axis, which will be displayed
on the top left of the screen.
●Directions are displayed as N (north), NE (north-east), E (east), SE
(south-east), S (south), SW (south-west), W (west) and NW (north-
west) respectively.
MEMO
●Tilting, zooming and focusing operations are possible when this menu is displayed.
●If a start position for the direction axis has already been set, the camera will move
to this start position when this menu is invoked.
NE
SW
E
N
NW
SE
W
WestEast
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILTLENS
CAMERA/POSITION
CAMERA POSITION
REMOTECONTROLUNIT
RM-P2580
ALARM
POWER
KEYLOCK
MENU button
CAMERA button
SET button
Numeric
keys
PAN lever
ENTER
button
MENU
CAM.FUNCTION1..
CAM.FUNCTION2..
CAM.TITLE/ALARM..
CAM.ALC/VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
<
MENU
>
EXIT
<
SET
>
SUB MENU
MENU Screen
CAMERA TITLE / ALARM
CAM.TITLE EDIT..
AREA DISPLAY.. DIR
ALARM TITLE SIZE DOUBLE
ALARM TITLE EDIT..
ALARM INPUT..
ALARM OUTPUT..
<
MENU
>
RETURN
<
SET
>
SUB MENU
CAMERA TITLE/ALARM Screen
<
MENU
>
RETURN
DIRECTION STANDARD AXIS
SET UP STANDARD AXIS (N)
DIRECTION STANDARD AXIS Screen