Filter
Top Products
30
2-2 Setting PC's IP Address [Windows 2000]
Settings (Step 2 Network Settings)
Upon installing the camera, set the IP address of the PC that is used to operate this camera.
For Windows 2000, set according to the following procedure.
1.
Click .
• Select [Settings] and click [Properties].
2.
Double-click [Network and Dial-up Connection].
3.
Double-click [Local Area Connection].
1
Click .
2
Select [Internet Protocol (TCP/IP)].
3
Click .
31
4.Click .
4
Select [Use the following IP address].
5
Set [IP address] to 192.168.0.3.
6
Set Subnet mask to an appropriate value.
Ask the network administrator if
necessary.