Filter
Top Products
80
Operations (Step 5 Operating Using a Web Browser)
5-4 Setting Using the Web Browser (3. Alarm Setting)
Alarm Setting window:
http://******/alarm-e.html ("******" represents the URL of VN-C205)
This page describes procedures for setting VN-C205 operation upon input of alarm signals.
Click to apply settings and to save the
set values.
Click
to apply settings without saving
the set values. These settings will be cleared
upon turning off the power of VN-C205, and
the previous settings will be restored.
1
2
3
81
Ⅵ Alarm In
For specifying the camera operation upon
input of alarm signals.
1
IN1/IN2
On : Detect Mode
(Set value: Make, Break, Toggle)
: Alarm Out
(Set value: Not Available, OUT1, OUT2)
: Message Packet
(Set value: Available, Not Available)
: FTP
(Set value: Available, Not Available)
: Shutdown
(Set value: Available, Not Available)
Off : Do not use Alarm 1 and Alarm 2.
2
Relay Alarm
On : Alarm Out
(Set value: Not Available, OUT1, OUT2)
: Message Packet
(Set value: Available, Not Available)
: FTP
(Set value: Available, Not Available)
: Shutdown
(Set value: Available, Not Available)
Off : Do not use Relay Alarm.
Ⅵ Alarm Out
For performing setting related to output during
an alarm activation.
3
OUT1/OUT2
On : Output Value
(Set value: ON, OFF)
:Pattern
(Set value: Level, Momentum)
: Momentum Interval
(Set value: 1 to 5000 milliseconds)
Off :Do not output alarm.
Notes
● Set output settings according to settings of
the device for which alarm output is sent to.
● When alarm setting is complete, always
check to ensure that the alarm is functioning
correctly.