JVC VN-C205 Digital Camera User Manual


 
60
Image Quality Setting
Item Function/Set Value
Set the maximum transmission control.
Setting of compression level is possible when this is set to "OFF",
and images will be sent out at the specified compression level.
The smaller the value, the lower the compression level and hence
a higher image quality. However, data volume will also increase.
Set Value: 1 to 7
Setting of bit rate is possible when this is set to "ON", and the
compression level of images will be automatically adjusted ac-
cording to the specified bit rate before they are sent out.
Set value: 32 kbps to 8 Mbps
Initial Value
OFF
2
Distribution Control
OFF
ON
Operations (Step 3 Setting Using the V.Networks Controller)
Note
It will be necessary to establish connection again upon
setting to enable display at the correct frame rate.
The "V.Networks Controller" can be used to perform image quality settings such as
compression level and white balance.
1.
Select [Setting] and [Quality].
2.
Change the set values.
3-5 Image Quality Setting
* When the [Distribution control ON] is selected,
the left screen will be displayed.
When setting is complete, click
.
61
3-6 Frame Rate
Set the maximum number of images per
second that are sent from VN-C205.
(Factory Setting: 15)
Set value : 30, 15, 10, 8, 6, 5, 4, 3, 2, 1,1/
2,1/3, 1/5, 1/10, 1/15, 1/20, 1/30
The "V.Networks Controller" can be used to set a maximum value for the frame rate,
which indicates the number of live image updates per second.
1.
Select [Setting] and [Frame rate].
2.
Set the [Frame Rate].
Note
The actual number of frames received and displayed per second is dependent on factors such
as PC performance, compression level of images and the LAN environment.
In the case of a LAN environment where multiple operations are being performed at one time
(particularly when the network traffic is heavy), reduce the number of frames to be transmitted.
Caution
Frame rate for local recording cannot be set using this function. To set the frame rate for local
recording, make use of the "VN-C205U Setup Tool" (
Page 46).