Filter
Top Products
10-2
Lightly press the Shutter Release
button to start the autofocus
operation and switch the exposure
meter on.
Indicators inside the viewfinder and
Status LCD panels turn On. They
remain on for approximately 8
seconds after you take your finger
off the Shutter Release button, then
automatically turn Off.
Fully press the Shutter Release
button to release the shutter.
☛ Press the Shutter Release
button slowly. Depressing the
Shutter Release button
abruptly may result in camera
shake.
To set the meter so the Status LCD panels turn Off after 4 seconds,
16 seconds, or 32 seconds, use Custom Setting #15. Refer to
“Custom Settings” on page 13-32.
To deactivate autofocus when the Shutter Release button is lightly
pressed, use Custom Setting #4. Refer to “Custom Settings” on page
13-32.
F
N
F
O
O
MODE
CUSTOM
CUSTOM