Filter
Top Products
11-9
11
Flash
Test Firing
You can test to determine if a subject is within the appropriate distance range for the
current aperture.
1 Turn on the camera.
2 Turn on the Speedlight.
3 Lightly press the Shutter
Release button, then release.
4 Aim the Speedlight at the
subject and press its FLASH
button
5 Confirm that the Ready light is
On.
If the Ready lights on the
Speedlight and inside the
camera viewfinder blink for
approximately 3 seconds after
the firing, the light may have
been insufficient for correct
exposure. If this occurs, use a
wider aperture or move closer to
the subject before capturing
images. Refer to the SB-28
instruction manual.
In Auto Aperture mode, the
camera determines the aperture
and the flash conducts auto flash
with that f-stop.
C
S
L
MODE
O
O
F
N
F
SELMODEZOOM
ISO
ZOOM
mm
m
181396431.510.6 0.8 2
FLASH
ON / OFF
A
STBY