Filter
Top Products
11-4
Standby Mode
The SB-28D features a Standby mode that helps conserve the battery in your Speedlight.
When the Speedlight is in this mode, it will go to sleep if you don’t touch any camera or
Speedlight controls for 80 seconds. STBY appears in the Speedlight’s LCD panel when
the flash is in Standby mode.
Enabling/Disabling Standby Mode
You can enable or disable Standby mode according to your personal preference.
Waking the SB-28D or SB-28DX from Standby mode.
If your Speedlight goes to sleep while in Standby mode, you can “wake” it by doing the
following:
Hold the Speedlight’s MODE
button and press its ON/OFF button.
If the Speedlight was in Standby
mode, Standby mode will be
disabled. If not, Standby mode will
be enabled.
STBY appears in the Speedlight’s
LCD panel when the Speedlight is in
Standby mode.
Lightly press the camera’s Shutter
Release button.
The Speedlight wakes up
automatically
SELMODEZOOM
ISO
ZOOM
mm
m
181396431.510.6 0.8 2
FLASH
ON / OFF
A
STBY
C
S
L
MODE
O
O
F
N
F